Bronze
Bronze is an alloy of copper and tin up to 20% (tin bronze), copper and aluminum up to 10% (aluminum bronze). It has high strength even at higher temperatures. Good corrosion resistance. Resistance to scale formation, good cold formability. Average specific gravity 8.4 kg/cm3.
Application: impact and vibration stressed engine and gearbox components. High strength bolts and nuts, shafts, spindles, worm and gears, bearings and sliding components. Springs, paper and chemical industry, shipbuilding and engineering.
Stocks are wires, rods, pipes. We supply materials outside the stock range from the factory or from our external suppliers.
Bronze wire
alloy | hardness | Rm (Mpa) | A100 mm (%) | surface | diameter (mm) | standard | |
CuSn6 |
CW452K |
R360 | 360 – 440 | min. 60 |
bright |
0,6 – 5,0 |
EN 12166 |
R530 | 530 – 630 | min. (8) | |||||
R740 | 740 – 900 | ||||||
R900 | min. 900 |
Bronze sheets and plates
alloy | temper | Rm (Mpa) | A50 min. (%) | surface | thickness (mm) | standard | |
CuSn6 | CW452K | R350 | 350 – 420 | 45,00 | bright | 1,0 – 15 | EN 1652 |
CuSn7Zn4Pb7 | CC493K | GC | min. 260 | 12,00 | as rolled | 22 – 150 | EN 1982 |
CuAl10Fe5Ni5 | CC333G | GC | min. 650 | as rolled | 3 – 150 | EN 1982 |
Bronze round bars
alloy | temper | Rm (Mpa) | A100 mm (%) | size (mm) | standard | ||
CuSn8 | CW453K | R450 | min. 450 | 26 | 3 – 300 | EN 12163 | |
CuSn12 | CC483K | GC | min. 300 | 6 | 3 – 300 | EN 1982 | |
CuSn7Zn4Pb7 | CC493K | GC | min. 260 | 12 | 3 – 300 | EN 1982 | |
CuAl10Fe3Mn2 | CW306G | R590 | min. 590 | 12 | 3 – 300 | EN 12163 | |
CuAl10Ni5Fe4 | CW307G | R680 | min. 680 | 10 | 3 – 300 | EN 12163 |
Bronze tubes
alloy | temper | Rm (Mpa) | size (mm) | wall (mm) | standard | ||
CuSn12 | CC483K | GC | casted | min. 300 | 20 – 250 | 8 – 100 | EN1982 |
CuSn7Zn4Pb7 | CC493K | GC | casted | min. 260 | 20 – 390 | 5 – 300 | EN1982 |
Bronze flat bars
alloy | temper | Rm (Mpa) | width (mm) | thickness (mm) | standard | ||
CuSn7Zn4Pb7 | CC 493K | GC | min. 260 | 6 – 120 | 2 – 25 | EN 1982 | |
CuSn8 | CW453K | R450 | min. 450 | 20 – 90 | 3 – 30 | EN 12167 | |
CuAl10Ni5Fe4 | CW307G | R600 | min. 600 | 20 – 180 | 10 – 80 | EN 12167 |
Contact us
Headquarters Prague
ALMIO, s.r.o.
Dobronická 1257
148 00 Praha 4 - Kunratice
Map
IČO: 25067249
DIČ: CZ25067249
Warehouse Olomouc
ALMIO, s.r.o.
Hamerská 624/19
772 06 Olomouc - Holice
Map
IČO: 25067249
DIČ: CZ25067249
Subsidiary Jablonec
ALMIO PLUS s.r.o.
Liberecká 502
466 01 Jablonec nad Nisou
Map
IČO: 26693666
DIČ: CZ26693666